weight: part number 5 4 3 2 1 x.x: 0.5 mm x: tolerances: dimensions are in millimeters initial release a 877.670.7118 www.tensility.com 800 20802 sockeye place #130 541.323.4202 fax notes 541.323.3228 tel 2:1 bend, or 97701 usa 0.05 mm description: molding style scale: sheet 1 of 1 size a 50-00025 connector, dc jack, 5.5x2.1xl17.4 mm, function test: no open, no short circuit, no int date description revision 9/2/2009 added test data 11/9/2012 a1 rohs compliant x.xx: 0.3 mm materials ?? 1. insulator, abs, black ?? 2. pin, c3604 brass, 2 m nickel plated ?? 3. shell, c3604 brass, 2 m nickel plated ?? 4. spring contact, c5191 phosphor bronze, 2 m nickel ?? plated ?? electrical requirements ?? dielectric strength: 1 min @ 500 vac ?? insulation resistance: 100 m ? @ 500 vdc ?? contact resistance: 30 m ? or less ?? rated voltage: 20 vdc ?? rated current: 7 a ?? mechanical requirements ?? insertion force: 0.3-3 kgf ?? withdrawal force: 0.3-3 kgf ?? durability: 5000 mating cycles while maintaining; 0.3 kgf ?? min. insertion force, 0.2 kgf min. withdrawal force and a less ?? than 100 m ? contact resistance. ?? environmental requirements ?? damp test: 40 c, rh 90-100% for 96 hrs. cool to ambient ?? and recover for 2 hours. maintain dielectric strength of 500 ?? vac for 1 min, insulation resistance of 50 m ? @ 500 vdc ?? minimum and a contact resistance of 100 m ? or less. ?? ?? dry test: 70 c, rh 70-85% for 96 hrs. cool to ambient and ?? recover for 2 hours. maintain insulation resistance of 50 ?? m ? @ 500 vdc minimum and a contact resistance of 100 ?? m ? or less. ?? ?? salt spray test: 35 c, rh 90-95% , 5% nacl mist for 24 hrs. ?? wash parts after test. maintain mechanical requirements ?? and a contact resistance of less than 80 m ? . ?? operating range ?? -25 to 70 c, relative humidity of 85% or less 4 2 3 1 1.3 0.30 11.5 1 2.1 + - 8 0.05 0 0.04 5.5 + - 0.10 0 15 0.30 17.4 0.50 1.5 2.2
|
